How to Bypass Charging Port on Bluetooth Speaker (Explained)

Is there any way to bypass the charging port on my Bluetooth speaker? I damaged the port, and now it won’t charge. I’ve tried using a paperclip, but it doesn’t seem to be working.

If this is you, worry out! This blog post will cover two methods to bypass the damaged port if you’re in a bind but need to charge your speaker.

Bypass Charging Port on Bluetooth Speaker

How to Bypass Charging Port on Bluetooth Speaker

If your Bluetooth speaker is not charging, here is a few ways to bypass the charging port.

USB port and a USB to USB cable

If your Bluetooth speaker has a USB charging port, you can use a USB to USB cable to bypass micro USB charging port and charge the speaker directly from the USB port.

To do this, simply connect the USB cable to the USB port of the speaker and then to a USB port on your computer or other USB power source. The speaker will begin charging from the USB port.

A USB to USB cable can charge a Bluetooth speaker because it can give input and output of electricity. The USB cable can take the electrical current from the USB port on the computer and transform it into the right current for the speaker.

When a speaker is connected to a USB port, it will first draw a small amount of current to determine if the port can provide the required amount of power. If the port can provide the required power, the device will draw the full amount of current.

Connect the Charging Cable to the Charging Logic

  1. Open your Bluetooth speaker and locate the wires leading to the faulty charging port.
  2. Take a look at the connection points and identify which is + and -.
  3. Cut one end of your charging cable and measure the charger output to identify the + and – inner wires.
  4. Match the negative and positive connection points on the board with the negative and positive wires of the charging cable. This will ensure that the charging cable is properly connected to the charging board and that there’s no backward circuit.
  5. Solder the wire correctly on the board, being careful not to damage other components of the speaker board.
  6. Replace the back panel and drill holes to pass the charging cable outside.
  7. Cut the other end of the charging cable and connect crocodile clips.
  8. Connect the crocodile clips to a battery or power supply anytime you want to charge the Bluetooth speaker.

Can I Wire a Charging Wire Directly to the Speaker Battery?

You can’t just wire a charging wire directly to the speaker battery – the battery needs charging logic. A wire alone will not work.

Even if the current is passed directly to the batteries, you risk damaging them.

Can I Charge a Bluetooth Speaker with Aux?

As technology evolves, we are presented with new ways to use and charge our devices. One question that often comes up is whether or not you can power a Bluetooth speaker via the aux port.

The short answer is no – Bluetooth speakers can’t be charged from the Aux port since it’s only used for audio output.

Charging your speaker via the Aux port would be similar to trying to charge your smartphone with a headphone jack – it just doesn’t work. So if you’re looking to charge your Bluetooth speaker, you’ll need to use the proper charging port.

How do I Replace Broken Charging Port on Bluetooth Speaker

Replace Broken Charging Port on Bluetooth Speaker

If your Bluetooth speaker is not charging, it may be due to a broken charging port. If you don’t want to leverage the bypassing methods discussed above, you can as well replace the broken charging port.

To do this, you will need:

  • A small head screwdriver
  • A flathead screwdriver
  • A soldering iron
  • Solder
  • A replacement charging port
  1. First, use the small head screwdriver to remove the screws from the back of the speaker.
  2. Next, use the flathead screwdriver to pry open the speaker case carefully.
  3. Once the case is open, locate the charging port. It will be attached to the speaker’s circuit board.
  4. Use a soldering iron to remove the old charging port from the speaker.
  5. Solder the new charging port onto the speaker.
  6. Reassemble the speaker and test the charging port to ensure it’s working.

What Is the Problem With My Bluetooth Speaker’s Charging Port?

There are a few reasons why your Bluetooth charging port might not be working. Here are four possible explanations:

There Is a Problem with the Power Source

If you are having trouble charging your Bluetooth device, it’s essential to check the power source first. If the power source is the issue, use another power outlet.

The Charging Port Is Damaged and Needs to Be Replaced

If your Bluetooth charging port is damaged, it will need to be replaced in order to charge your Bluetooth speaker. The port is responsible for sending a signal to the charging pad, which then charges the battery. Without a functioning port, the charging process can’t take place.

The Charging Port Is Dirty and Needs to Be Cleaned

If your Bluetooth charging isn’t working, it could be because the charging port is dirty and needs to be cleaned. When the port is dirty, it can prevent the charger from making a good connection with the device, which can cause the charging process to be hindered or even fail altogether.

You can clean the charging port with a can of compressed air or a cotton swab. Just be sure to turn off your device before you start cleaning, and be gentle, so you don’t damage the port.

The Port Is Not Properly Aligned With the Speaker

Another common reason your Bluetooth speaker charging may not be working is that the port is not properly aligned with the device.

This can often happen if the port is loose or if the device is not properly seated in the port.

This being the case, you’ll need to properly adjust the port to align with the device before charging your speaker.

Ways to Protect your Bluetooth Speaker Charging Port from Damage

Your Bluetooth speaker’s charging port is one of the most vulnerable parts of the device. It’s often exposed and unprotected, which makes it susceptible to damage from drops, dust, and other debris. Luckily, there are a few easy ways to keep your charging port clean and protected.

One way to protect your charging port is to use a rubber or silicone cover. These covers fit snugly over the port and help to keep out dust and debris. They also provide a bit of shock absorption, which can help to protect the port from damage if your speaker is dropped.

Another way to protect your charging port is to use a charging cradle or dock. These devices keep the port off of the ground and away from potential damage. They also provide a place to store your speaker when it’s not in use, which can help to keep the port clean.

Lastly, avoid using sharp objects or abrasive materials near the port, and be gentle when inserting and removing the charging cable.

Ways to Charge a Bluetooth Speaker without Its Charger

If you’re a music lover, chances are you’ve invested in a Bluetooth speaker so you can take your tunes with you wherever you go.

But what happens if you lose your speaker’s charger? Or what if you want to use your speaker while you’re on the go and don’t have access to a power outlet?

Don’t worry – there are a few ways you can charge your Bluetooth speaker without its charger:

  1. Use a power bank
  2. Use a mobile phone charger
  3. Use a laptop and a USB cable
  4. Use a wireless charging station

The Bottom Line

If your speaker does not have a charging port or if the charging port is not working, there are still ways to use the speaker. The easiest is to use a USB to USB cable and the USB port to charge the Bluetooth speaker with a device such as a laptop.

If you are familiar with wiring, you can disconnect the charging port from the speaker’s charge logic board and connect a wire that you can connect to a power outlet when needed.

Lastly, you can replace the damaged charging port entirely.

That said, you should take care of your Bluetooth speaker to prevent damage to components such as the charging port.

Leave a Reply

Your email address will not be published. Required fields are marked *