Water and phones don’t mix. But sometimes you can’t avoid using your phone in the rain or dropping it in the toilet.
Here is a guide and some tips on how to get water out of the speaker on phone.
Check for Water Damage
The first thing you need to do is check for water damage. If your phone was submerged in water, there is a good chance that water got into the speaker.
To check for water damage, look for any signs of moisture or water around the speaker. Also, try to listen for any strange noises coming from the speaker. If you notice any water damage, you will need to take action immediately.
Turn Off Your Phone
If you notice any water damage, the first thing you should do is turn off your phone. This will help prevent any further damage from occurring.
Once your phone is turned off, remove the battery and SIM card. These are two of the most sensitive parts of your phone and they can be easily damaged by water.
Remove the Battery
The next step is to remove the battery. This is a very important step because water can damage your phone’s battery and cause it to leak.
To remove the battery, first find the small hole on the back of your phone. Insert a small object, such as a paperclip, into the hole and gently push until the battery pops out.
Once the battery is out, apply the following tips on how to get water out of your phone speaker.
Use a Vacuum Cleaner
If you’re wondering how to get water out of your phone speaker, one option is to use a vacuum cleaner. By using the vacuum cleaner’s hose to gently suck the water out of the speaker, you can help prevent any further damage to your phone.
How to Use a Vacuum Cleaner:
1. Plug the vacuum cleaner in and wait for it to heat up.
2. Switch the vacuum cleaner to its lowest setting.
3. Place the hose of the vacuum cleaner over the speaker of your phone.
4. Hold it in place for about 15 seconds.
5. Turn off the vacuum cleaner and remove the hose.
6. Allow the phone to dry completely before using it again.
If your phone is still wet, you can also try using a hairdryer on the lowest setting to dry out your phone speaker. Be sure to hold the hairdryer at least six inches away from your phone to avoid causing any further damage.
You should also avoid using your phone until it is completely dry, as this could cause more water to seep into the speaker and damage your phone.
Use a Hairdryer
Another way to get water out of your phone speaker is to use a hairdryer. By using the hairdryer on the lowest setting and holding it at least six inches away from your phone, you can help dry out the speaker and prevent any further damage to your phone.
How to use a hairdryer:
1. Plug the hairdryer in and wait for it to heat up.
2. Switch the hairdryer to its lowest setting.
3. Hold the hair dryer at least six inches away from your phone.
4. Point the hairdryer towards the speaker, and move it back and forth across the speaker until it is dry.
5. Turn off the hairdryer and unplug it from the outlet.
6. Allow the phone to dry completely before using it again.
Avoid using your phone until it is completely dry, as this could cause more water to seep into the speaker and damage your phone.
Another way to remove water from your phone speaker is to use alcohol. Alcohol will help evaporate the water and dry out your phone speaker.
How to use alcohol:
1. Pour a small amount of alcohol onto a clean cloth.
2. Gently wipe the cloth over the speaker of your phone.
3. Allow the alcohol to evaporate completely.
4. Allow the phone to dry completely before using it again.
Avoid using excess alcohol, as this could damage your phone. Excess alcohol can also be flammable, so make sure to keep it away from any heat sources.
If your phone is still wet, you can try using rice to absorb the water. Rice is a natural absorbent and will help soak up the water in your phone speaker.
How to use rice:
1. Pour a small amount of rice into a clean, dry container.
2. Place your phone in the container of rice.
3. Leave your phone in the rice for 24 hours to absorb the moisture.
4. Remove your phone from the container and allow it to dry completely before using it again.
Take it to a Professional
If your phone is still wet or you’re not comfortable attempting to fix it yourself, you can take it to a professional. A professional will be able to properly dry out your phone and make sure that no further damage is done.
How to find a professional:
1. Look for a phone repair shop in your area.
2. Call the shop and ask if they offer water damage repair.
3. If they do, take your phone to the shop and have them fix it.
Be prepared to pay for the repairs, as water damage can be expensive to fix. The advantage of going to a professional is that they will be able to properly dry out your phone and make sure no further damage is done.
Preventing Water Damage in Future
The best way to fix water damage is to prevent it from happening in the first place. There are a few things you can do to help keep your phone safe from water damage:
i. Keep your phone in a waterproof case when you’re near water.
ii. Avoid using your phone in the rain or snow.
iii. Keep your phone away from pools, hot tubs, and beaches.
iv. Don’t store your phone in humid places, like the bathroom.
v. Don’t drop your phone in water or other liquids.
Frequently Asked Questions
Q: How do I know if my phone speaker is wet?
If your phone speaker is wet, you may notice that the sound is muffled or distorted. The speaker may also make crackling or popping noises. Also, if you touch the speaker and water come out, then it is definitely wet.
Q: Is it okay to use my phone if my speaker is wet?
It is not recommended to use your phone if the speaker is wet. By still using your phone, you run the risk of damaging the speaker or causing more water to seep in and damage your phone. Some of these damages may not be covered by your warranty.
Q: What is the best way to get water out of my phone speaker?
The best way to get water out of your phone speaker is to use a hairdryer. You can also use alcohol or rice, but these methods may not be as effective.
If your phone is still wet, you can take it to a professional to have them fix it. You should be careful when using any of these methods, as you don’t want to damage your phone.
Q: How can I prevent water damage in the future?
The best way to prevent water damage is to avoid using your phone near water. If you’re going to be near water, keep your phone in a waterproof case.
You should also avoid using your phone in the rain or snow. When you’re not using your phone, store it in a dry place to avoid any moisture buildup.
Q: How much does it cost to fix water damage?
The cost of fixing water damage can vary depending on the severity of the damage. If the damage is minor, you may be able to fix it yourself.
However, if the damage is more severe, you may need to take it to a professional. The cost of repairs can range from $50 to $200.
Q: How do I clean my phone speaker?
There are a number of ways you can clean your phone speaker. You can use a soft cloth to wipe down the speaker, or you can use compressed air to blow any dust out of the speaker.
Another option is to use a vacuum cleaner with a soft brush attachment to gently brush the speaker. If your speaker is very dirty, you can use an alcohol-based speaker cleaning solution.
Be sure to test the cleaning solution on a small area of the speaker first to make sure it doesn’t damage the speaker.
It is not recommended to use your phone if the speaker is wet. By still using your phone, you run the risk of damaging the speaker or causing more water to seep in and damage your phone.
Some of these damages may not be covered by your warranty. The best way to prevent water damage is to avoid using your phone near water.
By using the above tips, you can help get water out of your phone speaker and prevent future water damage. Feel free to leave a question or comment below!